Report settings’ units: decimeter
Hi, In Norway, all window and door manufacturers use a decimetric dimension module for their products. For example: – a door 2100mm x 900mm would be coded as 21x9M (M standing for Module, I guess). – a window 1500mm x 600mm would be coded as 15x6M So my request: would it be possible to add…
Read MoreDifferent materials for inside and outside of window frame/casement
Hi, I use FlexTools windows a lot in my design but spend quite a bit of time modifying the default frame components to allow the use of different materials on the inside and outside of the frame. Most window manufacturer offer different finish options for their frames, for example anodised aluminium on the outside and…
Read MoreWallCutter Layer Templates
In wall cutter–a refinement of the software for interior elevations would be to set the last cutting plane range to change the reveal. So the first first layer of say for instance 8 layers could be the full frame range and the last could be a smaller range. Basically, you could make a template for…
Read MoreLabel Correction
I would like to see “mullion” used in cases for windows and doors where “muntin” is overused and used incorrectly. Mullion are the bigger/heavier horizontal or vertical members. Muntins are the wood/aluminum dividers separating panes/ thermal units no-a-days. Look it up! 🙂 Thanks. Red-Seal carpenter here from Canada–did a bit of glazing as well in…
Read MoreGap between frame and sash
Would it be possible to add a small gap between the frame and sash? When my type is awning window that opens outwards it just looks like a flat surface when rendering, you can’t really tell whats´s frame and what´s sash on the rendered picture. It would look way more realistic.
Read Morefile2compfinder
Открывать в component finder не только директории, но и отдельные файлы, если это возможно. Было бы очень удобно извлекать компоненты из ранее сделанных проектов. С уважением, Сергей. Open in component finder not only directories, but also individual files if possible. It would be very convenient to extract components from previously made projects. Respectfully, Sergey.
Read MoreOpen for Plan. Close for Elevation.
Usually, I want the 2D look open doors on plan view, amd 3D look closed doors on elevation view. As SketchUp Scenes doesn’t reconized the click behavior, and in order to achieve it, I need to double the door, put on 2 separated layers. Layer OPEN and Layer CLOSED. Would be great if your planview…
Read MoreWall Cutter 2 – Cut all components in one shot
Would like to see wall cutter can cut 2 or more components at the same time. Example from attached image, the door (wall cutter) can be placed and auto cut hole on 1. Glass panel 2. Window frame both in same time.
Read MoreGlobal Settings
The ability to set some universal settings (standard frame/sill width, sill protusion, etc)
Read MoreDouble Hung Windows
Please add the ability to add grills on one or both window sashes
Read More