Report settings’ units: decimeter
Hi, In Norway, all window and door manufacturers use a decimetric dimension module for their products. For example: – a door 2100mm x 900mm would be coded as 21x9M (M standing for Module, I guess). – a window 1500mm x 600mm would be coded as 15x6M So my request: would it be possible to add…
Read MoreLabel Correction
I would like to see “mullion” used in cases for windows and doors where “muntin” is overused and used incorrectly. Mullion are the bigger/heavier horizontal or vertical members. Muntins are the wood/aluminum dividers separating panes/ thermal units no-a-days. Look it up! 🙂 Thanks. Red-Seal carpenter here from Canada–did a bit of glazing as well in…
Read MoreGap between frame and sash
Would it be possible to add a small gap between the frame and sash? When my type is awning window that opens outwards it just looks like a flat surface when rendering, you can’t really tell whats´s frame and what´s sash on the rendered picture. It would look way more realistic.
Read MoreOpen for Plan. Close for Elevation.
Usually, I want the 2D look open doors on plan view, amd 3D look closed doors on elevation view. As SketchUp Scenes doesn’t reconized the click behavior, and in order to achieve it, I need to double the door, put on 2 separated layers. Layer OPEN and Layer CLOSED. Would be great if your planview…
Read MoreDouble Hung Windows
Please add the ability to add grills on one or both window sashes
Read MoreCustom Thumbnails for Component finder
Hey, here is an idea. Add an option to replace the thumbnail on the component finder. At the moment component finder takes the Sketchup default thumbnail and places it in the component finder. That works in most of the cases, but in my case, I have a library of VRScene and Proxy items that I…
Read MoreFile size in component finder
Is it possible to add information about component size, file size to component finder viewer? In my opinion it would be very helpful.
Read MoreAdd Grid Options for All Window Components
Similar to Flex Window, but will allow grid options for upper/ bottom sash of double hung, and grid patter for casement, slider, and hopper/ awning components as well.
Read MoreFlex Slope – by percent, angle or pitch
One thing that would be great is the ability to plug in your percentage slope or desired pitch and then lock in one of the other values. Example. I know I need 25′ of length for a ramp and I cannot exceed 6% – so let FlexSlope tell me how much vertical height I can…
Read MoreMultiplier
When designing window facades, sometimes require 3, 4 (or more) divisions in the same component. Having a multiplier as an option to generate the desired number of divisions, should make this plugins almost perfect. Ex. Setting up a four slidding window
Read More