web counter
Skip to content
FlexTools
FlexTools Extension Expand

v2.12.5 - xx/03/2023 - coming soon

Bug Fixes

  • Fixed a bug where under some circumstances the dynamic components' UI would come up blank.
  • Fixed 'unintialized constant Gem::Version' error.
  • Fixed an error that would come up during model save under some circumstances.

 

v2.12.0 - 24/01/2023

Improvement

  • Removed welcome popup window that appears upon first install and now show the FlexTools manager window for immediate license activation.

 

v2.11.2 - 17/11/2022

Bug Fix

  • Fixed a critical bug that would cause all wall cutter openings to break when double clicking to open an skp file and afterward trying to open a new file and then cancelling the operation. (Double Click to open an skp > File > New > Cancel) - similar to a bug that was fixed in FlexTools v2.10.3.

 

v2.10.5 - 31/05/2022

Bug Fix

  • Fixed a compatibility bug where FlexTools would fail to load in Sketchup 2018.

 

v2.10.3 - 11/05/2022

Improvement

  • You can now open v2022 and later skp files through componentfinder when working in Sketchup 2021 (In versions previous to 2021 opening a later file version could cause Sketchup to crash).

 

Bug Fixes

WallCutter
  • Fixed a critical bug that would cause all wallcutter openings to break in a currently open model when trying to open a new file and then cancelling the operation (File > New > Cancel)
Dynamic Components (Patch)
  • Fixed a bug in the dynamic components extension where DCs would become slower after trying to open a new file and then cancelling the operation (File > New > Cancel).
  • Fixed a major long standing bug in sketchup's dynamic components extension where the component options window fails to load after the main sketchup file is saved to a folder path containing the escape sequences \u and \x).
  • Fixed a bug in the dynamic components extension where the DC options window would fail to load correctly because of missing sketchup localization files.

 

v2.10.0 - 26/01/2022

Improvements

  • Updated for compatibility with Sketchup 2022.
  • Updated Italian, Simplified Chinese, Traditional Chinese and Japanese translations.
  • Removed version numbers from tooltips for better legibility.

 

v2.9.11 - 06/12/2021

Bug Fix

  • Fixed a bug that would cause Sketchup to crash during startup when Thea Render and FlexTools were running together.

 

v2.9.7 - 23/06/2021

Critical Bug Fix

  • Fixed a bug where FlexTools would constantly fail to load after Sketchup was closed unexpectedly due to a system crash/power failure.

 

v2.9.6 - 29/04/2021

Critical Bug Fix

  • Compatibility with recent updates of MacOS.

 

v2.9.2 - 04/03/2021

Bug Fix

  • Fixed a bug that was preventing FlexTools from loading for some MacOS users.

v2.9.1 - 15/02/2021

Improvement

  • Significant improvement in startup loading time of the FlexTools extension.

Bug Fix

  • Fixed a bugsplat that could occur upon Sketchup quit on MacOS

v2.9.0 - 21/01/2021

New

  • New Italian translations thanks to Stefano Eliyhau Bernardi.

Improvements

  • Copying FlexTools from one plugin folder to another will now work correctly.

Bug Fixes

  • Fixed a bug where FlexTools would fail to load if DC plugin wasn't enabled.
  • Fixed an issue where changing a license key wouldn't always work correctly.
  • Fixed an issue where parts of the PNG library wouldn't load in some situations.

 

v2.8.3 - 01/11/2020

Improvements

  • FlexTools - Transitioned to save settings to a flextools json file instead of Sketchup's for more reliable changes when turning on and off toolbar items, and more.
  • Patched DC plugin for better string handling.
  • Updated subscription notifications with better UI and UX.

 

v2.6.3 - 10/08/2020

Bug Fix

  • Fixed a bug where a license expiration notification would come up when it shouldn't.
  • Fixed a bug where FlexTools wouldn't load if the Dynamic Components plugin was disabled.

 

v2.3.8 - 31/05/2020

Bug Fix

  • Fixed a bug that could cause some flex components to not work properly when specific scenes exist in the model.
  • Patched the dynamic components plugin so it stops throwing errors for users who have an apostrophe character " ' " in their user name.

 

v2.3.6 - 13/05/2020

Changes

  • Changed the extensions author (Appears in extension manager) from Frandzel3D to FlexTools.cc.

Bug Fixes

  • Improved flex components performance so they now work a bit faster.
  • Fixed a conflict with V-ray which would generate endless error messages in the console and could also lead to crashes.
  • Fixed a rare bug that could cause FlexTools to not activate or could cause Sketchup to crash on startup.
  • Fixed a bug where under certain circumstances activating with a new license key wouldn't work and changing a license keys wouldn't work either.

 

v2.3.2 - 22/12/2019

Improvements

  • Improved error messages.

Bug Fixes

  • Fixed a bug where repeat activations were needed every time Sketchup was restarted for specific packages (2017, BetaPack).
  • Fixed a loading error when the Dynamic Components plugin was disabled.

 

v2.3.0 - 10/12/2019

Improvements

  • Better UI/UX notifications and messages.
  • Suppressed annoying ruby warning messages that were appearing in the console.

 

v2.1.0 - 02/12/2019

Improvements

  • Added the ability to change the active license key in the FlexTools Manager.

Bug Fixes

  • Fixed a couple of bugs where FlexTools would fail to load because of broken file paths on international systems - Many thanks to Uriel Stern for bearing with us on this one.

 

v2.0.3 - 26/11/2019

Improvements

  • Behind the scenes improvements and bug fixes.

 

v1.11.0 - 21/08/2019

Improvements

  • Added toolbar help button for quick access to new help and resources page.

 

v1.10.8 - 06/08/2019

Improvements

  • Simplified Chinese translations updated.
  • Spanish translations updated.
  • Added compatibility with updated translation tool.

 

v1.10.5 - 10/06/2019

Improvements

  • Auto updates timeout improved for slower internet connections.
  • Traditional Chinese (TW) translations updated.
  • Japanese translations updated.

 

v1.10.3 - 10/04/2019

Bug Fixes

  • Fixed a bug that would cause the summary field in DCs to disappear if the language was set to automatic or to another language.

 

v1.10.1 - 01/04/2019

Bug Fixes

  • Fixed a critical bug that could cause the DC plugin to crash when using a localized version of FlexTools.

 

v1.10.0 - 27/02/2019

Enhancements

  • Added ability to 'Check for updates' button from within the FlexTools Manager.
  • New Indonesian translations added.
  • New Turkish translations added.
  • New Russian translations added.
  • Removed 'installation was successful' text after download/update to prompt users to restart Sketchup for the installation to actually be successful.
  • Added centering to the auto-update pop-up window to prevent unwanted mysterious consequences.

 

v1.9.4 - 01/02/2019

Enhancements

  • Simplified Chinese translations updated.

 

v1.9.3 - 17/01/2019

Enhancements

  • Spanish translations updated.
  • Japanese translations updated.

Bug Fixes

  • Fixed an error that would come up if the Dynamic Components plugin was disabled.
  • Fixed a bug in the auto-updates system - '->vtrue' would appear under certain conditions instead of the new package version.

 

v1.9.2 - 27/11/2018

Enhancements

  • New Japanese translation added to the core extension.
  • Portuguese and Spanish translations updated.
  • UI adjustments in FlexTools manager for the updates system.
  • Bug Fixes
  • Fixed a bug that would cause installations on slow networks to fail.
  • Fixed MacOS installation.
  • Fixed a bug where some translations wouldn't load correctly.

 

v1.9.0 - 21/11/2018

Enhancements

  • Overhaul of the automatic updates system.
  • See what packages you have installed (current existing packages).
  • Everything should now work normally after an auto-update process is done.  After a restart the new changes will come into effect.
  • Better on-boarding  UX - Disabled buttons being gray.  When activation needed a prompt will pop up.
  • Friendlier error messages 🙃

Bug Fixes

  • Reduced the amount of Sketchup restarts after an auto-update to 1.
  • Fixed an issue where after an auto-update WallCutter could stop working until Sketchup was restarted.
  • Fixed an issue where under some conditions an auto-update would fail.

 

v1.8.1 - 07/08/2018

Enhancements

  • Added a preview when placing an upright component.
  • Added ability to hide the Place Upright tool from the toolbar through the FlexTools manager.
  • 'place upright' button is now OFF by default on first install.

Bug Fixes

  • Fixed a bug in wallcutter on the mac when multiple models were open.
  • Fixed a bug that under some circumstances could cause Sketchup to crash on component placement using the 'place upright' tool.
  • Fixed a bug that added an extra undo step upon component placement.

Notes

  • An automatic update will appear for customers who have FlexPack Pro.
  • The bugs were not present in FlexPack 2017.
FlexPack Pro Expand

v1.21.0 - 25/04/2020

New

  • New FlexWindow Arch component.

 

Enhancements

Sash Components
  • Added single/double/triple/quadruple glazing to all sash components.
  • Added the ability to extend the glazing into the sash's frame for the option of creating more realistic double-glazed windows through manual editing.
  • Moved all glass settings from the top level component into the sash sub-component.
  • Added a setting for shifting the sash component (glass and muntins) in and out.
  • Moved the Inset setting to appear above wall settings.
Casement Double
  • Changed it so it opens inwards by default.
FlexSlider
  • Improved settings for changing the width of the meeting rails vs changing the width of the left and right rails.
FlexPanel
  • Changed FlexPanel to be a regular non-wallcutter component by default (Less confusing).
  • Changed the default FlexPanel Inset setting from sunken panels (-4 cm) to 0.
General
  • Added material attributes to all flex components - default material names: FlexMat_Main, FlexMat_Glass, Flex_Mat_Hardware, FlexMat_Sill, FlexMat_Spacer
  • Removed all layers/tags from all components (excluding FlexStairs, FlexSlope and FlexRamp for now).

 

Bug Fixes

FlexDoors

  • Fixed an attribute in FlexDoor that would cause handles to misbehave when swapping panels between FlexDoor and FlexDoor Glass - Yes! You can now swap between solid and glass panels between the two doors!

  • Fixed missing faces in the default FlexDoor handle.

  • Fixed a bug in FlexDoor so wall cutter works properly when the frame is set to 0.

  • Fixed a bug in FlexDoors and FlexDoor Glass where the arc's Always ON setting wasn't always working properly.

FlexStairs
  • Fixed the FlexStairs component so all steps are copies by default (Before some of the steps were accidentally made unique).
Sash Components

  • Fixed a bug in all 'sash' components where muntins wouldn't be centered anymore after changing their Depth setting.

  • Fixed a typo in all sash components under the Style drop down (Borrom > Bottom).

 

 

v1.19.0 - 05/04/2020

New

  • New FlexDoor Glass component.
  • New door handles (Locksets 11-14) available in the 3D warehouse.

Enhancements

  • Updated all door components with a new Material attribute for easier application of materials and for scheduling purposes.  Default material name = 'FlexMat_Main'
  • Updated all door hardware components (handles and hinges) in all door components and in the 3D warehouse with a new Material attribute - Default material = 'FlexMat_Hardware'.
  • Updated all door handles so you can now adjust the inset position of the handles relative to the door's surface (useful for the new FlexDoor Glass).
  • Removed all layers (Tags) from all door components -  (layers will be removed from all flex components in future releases).

Translations

Updated Simplified Chinese translations for all tools and for the FlexRamp, FlexSlope and FlexStairs components.

 

 

v1.16.2 - 17/12/2019

Bugfix

Fixed a fatal error that was preventing FlexTools from loading at startup under certain circumstances that tended to coincide with Windows Update running.

 

 

v1.16.0 - 26/11/2019

Improvements

  • Usability improvement for FlexRamp - Added the ability to change how FlexRamp can be scaled: By Height (vertically) or By Length (horizontally) when the slope is fixed.  The default is set to 'Scale by Height'.

Bug Fixes

  • Fixed a bug in FlexDoor where one of the strike plates wasn't being hidden when Planview was enabled - Thanks to Hélio Cesar for pointing this out.

 

 

v1.16.0 - 26/11/2019

New

Components
  • New FlexRamp Component.

 

ComponentFinder v0.12.1
  • Added the ability to view file size of components.
  • Added the ability to sort components alphabetically and by file size (ascending/descending).
  • Added the ability to hide/display component names and file sizes.

 

Improvements

  • Open/Close tool updated to open all flex windows and doors (Those that can open).

 

Bug Fixes

  • Fixed a bug in the Open/Close tool where it wasn't opening FlexDoor since the previous update.
  • Updated FlexDoor with a minor fix for uneven door panels so the total opening dimension is now exact and correct.
  • Fixed the default glass thickness of FlexSlider from 1 cm to 0 cm (single face) so it is like all other flex window components. ( Thank you Ladislav )

 

 

v1.15.0 - 21/08/2019

Improvements

  • Added toolbar help button for quick access to new help and resources page.

Bug Fixes

FlexStairs - v1.3
  • Fixed a couple of bugs that would cause unexpected geometry to appear if the floor thickness was greater than the stringer thickness and extensions to top and bottom were enabled
  • Fixed some layer assignments.
ComponentFinder - v0.10.7
  • Fixed a bug where a refresh of a folder tab was necessary in order to see newly saved components from a previous session.
  • Fixed word-wrap of file names so they no longer get cut in the middle of a word if not necessary.

 

v1.14.0 - 06/08/2019

Improvements

FlexDoor - v1.16
  • Added an option for 2 unequal door panels - One panel has a set size and the other panel is flexible depending on total width of the component.
  • Clicking on the frame now cycles through: 1 door panel / 2 equal door panels / 2 unequal door panels (Before it would cycle through fixed panel options).

 

FlexStairs - v1.2
  • Changed Min Riser Height option to Max Riser Height.

 

Translations Updated
  • French translations updated for components and tools.
  • Spanish translations updated for components and tools.
  • Simplified Chinese translations updated for components and tools.
  • Traditional Chinese translations updated for a few components.

 

Bug Fixes

FlexStairs
  • Fixed a sub-component that had no layer assigned.
  • Fixed a bug where the stairs would misbehave if he landing step number was bigger than the number of steps.

 

FlexDoor
  • Fixed a regression bug with the hinges not being placed correctly.

 

v1.12.0 - 28/07/2019

New

FlexStairs v1.1🔗

  • Click on any step and it becomes a landing.
  • New option to extend the stringer to the top and/or bottom towards the floors.
  • New options to set the stringer thickness either by minimum thickness (waist) or by matching it to floors thickness.

Improvements

  • UI improvements for clarity in FlexStairs Component Options.
  • FlexStairs Learn Page updated with documentation of new features.

Changes

  • FlexStairs - Click to toggle 'Remove Top Step' replaced with click to toggle landings.  This option can be changed from within the component options window.

 

 

v1.11.0 - 02/07/2019

New

  • New FlexStairs Component v1 officially released
  • New FlexStairs Learn page.

 

 

v1.10.2 -13/06/2019

New

  • New Learn page for the FlexSlope component.

Improvements

  • FlexSlope component options window updated with (?) links that direct to the learn page.

Bug Fixes

  • Traditional Chinese translation updated with a fix for Slider and Double-Hung components.
  • Fixed a bug in the Hopper/Awning component.  When set to Awning the window pane would fly up.
  • Fixed the info link for the FlexSlope component so it points to the correct Learn Page: https://flextools.cc/learn/flexslope/

 

 

v1.10.1 -10/06/2019

New

  • Flex Slope component officially released with many improvements from the original beta.

Improvements

  • Updated 3 components: Slider, Double-Hung, Casement-Double to support the latest 20 distribution presets.
  • Improved the Colonial Style distribution to support adding divisions: Relevant to components: Slider, Double-Hung, Casement-Double, Fixed, Casement-Single, Hopper/Awning.
  • Traditional Chinese (TW) translations updated.
  • Japanese translations updated

 

v1.9.0 -10/04/2019

New

  • New component - Flex Casement Single.
  • New component - Flex Hopper Awning.
  • New component - Flex Fixed Window.

Bug Fixes

  • Fixed a bug in WallCutter that could cause a component to not cut through a wall if the wall was of a specific width.
  • Fixed a bug in the Casement Double component where the swing arcs could not be hidden.
  • Corrected the clearance distance in the Minimal Door B component from 6mm to 3mm.
  • Fixed an error (`undefined method 'valid?' for nil`) that would come up intermittently when copying wall cutter components between models.

 

v1.6.1 - 01/04/2019

Bug Fixes

  • Fixed a bug in Component Finder that would prevent icons that were missing under some conditions from refreshing correctly.
  • Fixed a bug where Component Finder and Sketchup could freeze when some folders or drives were unavailable or changed during a session.

 

v1.6.0 - 26.03.2019

New

  • Flex Casement Double window + 20 new window style presets

Enhancements

  • Open/Close tool support for Flex Casement Double and for Minimal Doors.
  • Showing ComponentFinder session loading progress

Bug Fixes

  • Fixed a ComponentFinder bug where all folder panes would disappear on start if source folders were moved or renamed.
  • Fixed a ComponentFinder bug that could hang session loading or folder/model scanning.
  • Fixed a WallCutter error that could block components from being deleted.

 

v1.5.0 - 27.02.2019

Enhancements

  • Added 2 new MinimalDoors.ru components.
  • New WallCutter feature for Hiding Cut Edges.
  • New Indonesian translations added.
  • New Turkish translations added.
  • New Russian translations added.
  • Updated French translations.
  • Updated Spanish translation for Double-Hung components.
  • Updated FlexDoor hardware (handles) component description and instructions for ease of use.  Hardware is now now changed by default through the 3D warehouse.
  • Updated FlexDoor to accept new versions of handles.

Bug Fixes

  • Fixed a bug in WallCutter where outside of context entities could be cut.

 

1.3.0 - 01.02.2019

Enhancements

  • New tool: Make Totally Unique - Makes a component and all of it's sub-components unique.
  • New tool: Make Unique - Works similar to Right Click > Make Unique.
  • Double-Hung component translated to Simplified Chinese.
  • Simplified Chinese translations updated for all tools.

Bug Fixes

  • Double-Hung component corrected to handle new translations.

 

v1.1.12 - 17/01/2019

Enhancements

  • Spanish translation updated for tools
  • Japanese translation updated for tools

Bug Fixes

  • Fixed a bug in FlexDoor where the hinges were not being placed correctly.
  • Flipped the glass face in FlexWindow to be facing correctly outward.

 

v1.1.11 - 27/11/2018

Enhancements

  • Added new flex double-hung component.
  • Added new Japanese translation to all previous components.
  • Improved Spanish, French, Portuguese translations.

 

v1.1.10 - 21/11/2018

Enhancements

  • Updated core extension for smoother auto-updates (See 'FlexTools Extension' release notes).
  • Updated ComponentFinder tool (See 'ComponentFinder' release notes).

Bug Fixes

  • Fixed a bug where SU would crash when a WallCutter component was placed on a wall with projected textures.
  • Fixed a possible rare crash on MacOS when using the 'Place Upright' tool.

 

v1.1.8 - 17/09/2018

Enhancements

  • New FlexSlider Window/Door v1.0

Bug Fixes

  • Fixed a bug where FlexDoor wouldn't load on Sketchup 2017.

 

v1.1.6 - 06/09/2018

Enhancements

  • Updated FlexDoor to v1.9 - New setting: 'Axis - Move' - Moves the door panel's axis point for creating a pivot door.

v1.1.3 - 23/08/2018

Enhancements

  • Added the ability to Exclude components from the WallCutter algorithm.

Bug Fixes

  • Fixed a bug that could cause Sketchup to crash if there were no faces inside the cutting component.
  • Fixed a bug that could cause Sketchup to crash if the faces in a cutting component had a width of 0.

v1.1.2 - 07/08/2018

Enhancements

  • Added a preview when placing an upright component.
  • Added ability to hide the Place Upright tool from the toolbar through the FlexTools manager.
  • 'place upright' button is now OFF by default on first install.

Bug Fixes

  • Fixed a bug in wallcutter on the mac when multiple models were open.
  • Fixed a bug that under some circumstances could cause Sketchup to crash on component placement using the 'place upright' tool.
  • Fixed a bug that added an extra undo step upon component placement.
Notes:
  • An automatic update will appear for customers who have FlexPack Pro.
  • The bugs were not present in FlexPack 2017.
FlexPack 2017 Expand

v1.6.11 - 26/11/2019

Improvements

ComponentFinder v0.12.1
  • Added the ability to view file size of components.
  • Added the ability to sort components alphabetically and by file size (ascending/descending).
  • Added the ability to hide/display component names and file sizes.

 

Improvements

  • Open/Close tool updated to open all flex windows and doors (Those that can open).

 

 

v1.6.10 - 21/08/2019

Improvements

  • Added toolbar help button for quick access to new help and resources page.

Bug Fixes

ComponentFinder - v0.10.7
  • Fixed a bug where a refresh of a folder tab was necessary in order to see newly saved components from a previous session.
  • Fixed word-wrap of file names so they no longer get cut in the middle of a word if not necessary.

 

v1.6.9 - 06/08/2019

Improvements

  • Simplified Chinese tool translations updated.
  • Spanish tool translations updated.

 

v1.6.8 - 10/06/2019

Improvements

  • Traditional Chinese (TW) translation updated.
  • Japanese translation updated.

 

v1.6.6 - 01/04/2019

Bug Fixes

  • Fixed a bug in Component Finder that would prevent icons that were missing under some conditions from refreshing correctly.
  • Fixed a bug where Component Finder and Sketchup could freeze when some folders or drives were unavailable or changed during a session.

 

v1.6.5 - 26/03/2019

Enhancements

  • Showing ComponentFinder session loading progress.

Bug Fixes

  • Fixed a ComponentFinder bug where all folder panes would disappear on start if source folders were moved or renamed.
  • Fixed a ComponentFinder bug that could hang session loading or folder/model scanning.

 

v1.6.4 - 27/02/2019

Enhancements

  • New Indonesian translations added.
  • New Turkish translations added.
  • New Russian translations added.
  • Updated French translations.
  • Updated FlexDoor hardware (handles) component description and instructions for ease of use.  Hardware is now now changed by default through the 3D warehouse.
  • Updated FlexDoor to accept new versions of handles.

 

v1.6.3 - 17/01/2019

Enhancements

  • Spanish translation updated for tools
  • Japanese translation updated for tools

v1.6.2 - 27/11/2018

Enhancements

  • Japanese translation added to all components and tools.
  • Behind the scenes improvements to the updates system with 2017.

 

v1.6.1 - 21/11/2018

Enhancements

  • Updated core extension for smoother auto-updates (See 'FlexTools Extension' release notes).
  • Updated ComponentFinder tool (See 'ComponentFinder' release notes).
  • Moved the 'Place Upright' tool to the toolbar.

Bugfixes

  • Fixed a bug for Sketchup 2016 (which isn't supported anymore)
  • Fixed a possible rare crash on MacOS when using the 'Place Upright' tool.
ComponentFinder Expand

v0.12.3 - 17/12/2019

Bugfix

  • Fixed a fatal error that was preventing FlexTools from loading at startup under certain circumstances that tended to coincide with Windows Update running.

 

v0.12.1 - 26/11/2019

New

  • Added the ability to view file size of components.
  • Added the ability to sort components alphabetically and by file size (ascending/descending).
  • Added the ability to hide/display component names and file sizes.

 

v0.10.8 - 21/08/2019

Improvements

  • Added toolbar help button for quick access to new help and resources page.

Bug Fixes

  • Fixed a bug where a refresh of a folder tab was necessary in order to see newly saved components from a previous session.
  • Fixed word-wrap of file names so they no longer get cut in the middle of a word if not necessary.

 

v0.10.7 - 06/08/2019

Imrovements

  • Simplified Chinese translations updated.
  • Spanish translations updated.

 

v0.10.5 - 10/06/2019

New

  • Traditional Chinese (TW) translation added.

Improvements

  • Japanese Translation updated.

 

v0.10.2 - 01/04/2019

Bug Fixes

  • Fixed a bug in Component Finder that would prevent icons that were missing under some conditions from refreshing correctly.
  • Fixed a bug where Component Finder and Sketchup could freeze when some folders or drives were unavailable or changed during a session.

 

v0.10.1 - 26/03/2019

Enhancements

  • Showing ComponentFinder session loading progress.

Bug Fixes

  • Fixed a ComponentFinder bug where all folder panes would disappear on start if source folders were moved or renamed.
  • Fixed a ComponentFinder bug that could hang session loading or folder/model scanning.

 

v0.10.0 - 27/02/2019

Enhancements

  • New Indonesian translations added.
  • New Turkish translations added.
  • New Russian translations added.
  • Updated French translations.

 

v0.9.0 - 17/01/2019

Enhancements

  • Added In-Model component browsing.
  • In-Model: Added to viewing modes - Top-Level and All.
  • In-Model: Double-clicking below the search field opens and closes the In-Model tab.
  • In-Model: Double-clicking on the divider maximizes the In-Model pane.
  • In-Model: Added a context menu: selecting all instances, saving as, deleting.
  • In-Model: Added the ability to view and place Groups.

v0.8.1 - 27/11/2018

Enhancements

  • Japanese, Spanish, Portuguese & French translations added.

 

v0.8.0 - 21/11/2018

Enhancements

  • Folder scanning depth increased from 5 levels deep to infinity.
  • Number of components you can display in one tab raised to a max of 6000 (Above 6000 thumbnails may break).
  • File and folder scanning done in the background so you can continue working while it's scanning.
  • Scanned files are now added incrementally as they are discovered.
  • File and folder scanning can now be canceled anytime.
  • Faster loading of open folder tabs during CF startup.
  • Added an additional larger zoom level - Files saved in previous versions of Sketchup require re-saving for HQ thumbs.
  • When opening the CF window it auto-focuses on the search field for even faster searching.
  • Component count added to each folder tab so you can see how many components there are.
  • Added an 'Add folder' button below the last opened folder tab.
  • Added a 'Go to containing folder' function to the Right Click menu within the CF window.
  • The search field is emphasized when a search returns no results.
  • Click on a folder tab's name and it changes to the full path of where the folder is located.
  • Moved the 'Refresh' button to each of the folder tabs so you can refresh them individually.
  • Added tooltips for the buttons in the folder tabs.
  • Hovering over a component in CF window shows a tooltip with the component's location.
  • Added a compact menu when the the CF window is resized to a small size.

Bug Fixes

  • Bugfix - Thumbnails could suddenly 'break' and would show placeholders instead (Only restarting Sketchup would solve the issue before).
FlexBetaPack Expand

v1.1.7 - 22/12/2019

Enhancements

  • Updated the toolbar icon for the beta FlexDoor with Glass Divs to reflect that it is a beta (towards the release of the new FlexDoor Glass).

 

v1.1.6 - 27/02/2019

Enhancements

  • Updated FlexDoor hardware (handles) component description and instructions for ease of use.  Hardware is now now changed by default through the 3D warehouse.
  • Updated FlexDoor to accept new versions of handles.

 

v1.1.5 - 17/01/2019

Enhancements

  • Added a new 'FlexDoor with Glass Divisions + **Side Panels**' component for direct download.

Bug Fixes

  • Fixed a bug in the 'FlexDoor with Glass Divisions' component where the hinges were not placed correctly.

 

v1.1.3 - 06/12/2018

Enhancements

  • Added the FlexBetaPack to the auto-updates system.

 

v1.1.2 - 05/12/2018

Bug Fixes

  • Corrected default door width and height parameters for the 'FlexDoor with Glass Divisions' alpha component to work better when side panels are shown.

 

v1.1.1 - 04/12/2018

First Release

  • Added FlexDoor with glass divisions
  • Added FlexSlope component